Guangzhou kehao Pump Manufacturing Co., Ltd.
Always be strict with product quality and be responsible for customer satisfaction
Add to Cart
Shantui Bulldozer 705-55-34580 Triple Pump D155AX-5
gear pumps are compact and simple with a limited number of moving parts. They are unable to match the pressure generated by reciprocating pumps or the flow rates of centrifugal pumps but offer higher pressures and throughputs than vane or lobe pumps. Gear pumps are particularly suited for pumping oils and other high viscosity fluids.
Of the two designs, external gear pumps are capable of sustaining higher pressures (up to 3000 psi) and flow rates because of the more rigid shaft support and closer tolerances. Internal gear pumps have better suction capabilities and are suited to high viscosity fluids, although they have a useful operating range from 1cP to over 1,000,000cP. Since output is directly proportional to rotational speed, gear pumps are commonly used for metering and blending operations. Gear pumps can be engineered to handle aggressive liquids. While they are commonly made from cast iron or stainless steel, new alloys and composites allow the pumps to handle corrosive liquids such as sulphuric acid, sodium hypochlorite, ferric chloride and sodium hydroxide.
External gear pumps can also be used in hydraulic power applications, typically in vehicles, lifting machinery and mobile plant equipment. Driving a gear pump in reverse, using oil pumped from elsewhere in a system (normally by a tandem pump in the engine), creates a hydraulic motor. This is particularly useful to provide power in areas where electrical equipment is bulky, costly or inconvenient. Tractors, for example, rely on engine-driven external gear pumps to power their services.
| part number | Compatible equipment | Weight(kgs) | |
| 705-55-34580 | bulldozers-D155AX-5 | 15 | |
| 705-11-30110 | BULLDOZERS D455A | 6.181 | SAL40 |
| 705-11-34100 | WHEEL LOADERS 530, 530B | 6.98 | SAL50 |
| 705-11-34110 | CRANES LW160 | SAL5 SAL45 | |
| 705-12-28010 | GD300A, GD605A, GD655A, GS360 | 4.58 | SAR25 |
| 705-21-28270 | WHEEL LOADERS WA380Z | SAL (1) 25 | |
| 705-21-31020 | D31A, D31AM, D31E, D31P, D31PG, D31PL, D31PLL, D31Q, D31S, D31SM, D37A | SAL2-36 | |
| 705-21-32050 | BULLDOZERS D85A, D85E, D85P | 6.32 | |
| 705-11-38010 | D60P, D65E, D65P, D70LE, D85E, D85ESS | 13.242 | SAL(3)080 |
| 705-22-26260 | BULLDOZERS D41E D41P Komatsu | 4.3 | |
| 705-22-28310 | DUMP TRUCKS HD465, HD605 | 4.592 | |
| 705-22-29000 | BULLDOZERS D455A | 5.75 | SAR28 13T |
| 705-22-40160 | BULLDOZERS D155A D155AX DUMP TRUCKS HM400 Komatsu | 16.04 | SAR100 |
| 705-40-01020 | BULLDOZERS, WHEEL LOADERS D-series and HM300, PC60, PC70, WA380/380Z/ 430/470 | 3.6 | |
| 705-41-08001 | EXCAVATORS PC20, PC30, PC38UU | 8.301 | SBR(1)-10+10+8 |
| 705-41-08070 | EXCAVATORS PC10, PC15, PC20 | 8.26 | |
| 705-41-08180 | EXCAVATORS PC07 | SBR10+10+6+2.5 | |
| 705-41-08210 705-41-08240 | EXCAVATORS PC28UD, PC28UG, PC28UU | 10 | SBR11+11+7+2.5 |
| 705-41-08260 | EXCAVATORS PC38UU, PC38UUM | 8.86 | 11+11+7+2.5 |
| 705-51-20300 | WHEEL LOADERS WA250 | 13.922 | SAL50+40 2+2 |
| 705-51-20370 | BULLDOZERS, CRN D60P, D65E, D65EX, D65P, D65PX, D70LE, D85E, D85ESS | ||
| 705-51-30290 | BULLDOZERS D155A, D155AX | 29 | |
| 705-51-11020 | WA70, WR8 | 9.96 | |
| 705-52-30390 | WHEEL LOADERS WA400 WA420 Komatsu | 22.232 | SAR100+28 |
| 705-52-30490 | WA500, WD500, WF550, WF550T | SAR100+28 1+2 | |
| 704-12-26120 | GD605A | 6.5 | |
| 705-34-25640 | DUMP TRUCKS HM350 Komatsu | SAR18 | |
| 705-52-31070 | EXCAVATORS PC750 PC750SE PC800 PC800SE Komatsu | 20.102 | |
| 705-56-26081 | WHEEL LOADERS WA200 WA200PT Komatsu | 21 | |
| 705-55-34560 | FORKLIT FD250 | 42 | |
| 705-56-34240 | WA420 | ||
| 704-11-38100 | D50 | ||
| 705-52-30390 | WA400, WA420 | 22.232 | SAR100+28 |
| 705-22-40160 | BULLDOZERS, DUMP TRUCKS D155A, D155AX, HM400 | 16.04 | |
| 705-22-26260 | BULLDOZERS D41E, D41P | 4.3 | |
| 705-11-26040 | WHEEL LOADERS WA50 | 4.3 | SAR25 10T |
| 705-11-26010 | EXCAVATORS PW150 |